ISPSoft User Manual Base on the project content, the first AH5xo host is auto-selected with module configuration in sync with HWCONFIG. Therefore, it is not possible to add modules in NWCONFIG, but configuration changes can be made in HWCONFIG settings. ● Method 1 Select a network module on the device list, and then drag it to a PLC in the working area. If the PLC does not support the network module selected, the mouse cursor becomes . For AH5x0 series, 10EN module can be placed on the main backplane, with a maximum of at least 8 modules. The SCM module can be put on the extension backplane and the number is limited according to the slot number of each backplane. .
When choosing to drag added SCM modules, users can decide the backplane position to drag and drop. After the users drag an AH10SCM series module to added to the node. at the right side of a node, an extension rack will be 20-16