ebm-papst · K3G310-BB49-02 · 12 pp.

ebm-papst K3G310-BB49-02 Operating Instructions & Service Manual PDF

Related manuals

Document text

ebm-papst Mulfingen GmbH & Co. KG Bachmьhle 2 D-74673 Mulfingen Phone +49 (0) 7938 81-0 Fax +49 (0) 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com 1. SAFETY REGULATIONS AND NOTES Please read these operating instructions carefully before starting to work with the device. Observe the following warnings to prevent malfunctions or physical damage to both property and people. These operating instructions are to be regarded as part of this device. If the device is sold or transferred, the operating instructions must accompany it. These operating instructions may be duplicated and forwarded for information about potential dangers and their prevention. CONTENTS 1 1.

SAFETY REGULATIONS AND NOTES 1.1 Levels of hazard warnings 1 1.1 Levels of hazard warnings These operating instructions use the following hazard levels to indicate potentially hazardous situations and important safety regulations: 1 1.2 Staff qualification 1 1.3 Basic safety rules 1 1.4 Electrical voltage DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Compliance with the measures is mandatory. 2 1.5 Safety and protective functions 2 1.6 Electromagnetic radiation 2 1.7 Mechanical movement WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Exercise extreme caution while working. 2 1.8 Emission 2 1.9 Hot surface 2 1.10 Storage CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or damage of property. 2 1.11 Disposal 3 2. PROPER USE NOTE A potentially harmful situation can occur and, if not avoided, can lead to property damage. 4 3. TECHNICAL DATA 4 3.1 Product drawing 5 3.2 Nominal data 1.2 Staff qualification 5 3.3 Data according to ErP directive The device may only be transported, unpacked, installed, operated, maintained and otherwise used by qualified, trained and authorised technical staff.

Only authorised specialists are permitted to install the device, to carry out a test run and to perform work on the electrical installation. 5 3.4 Technical features 5 3.5 Mounting data 5 3.6 Transport and storage conditions 6 3.7 Electromagnetic compatibility 1.3 Basic safety rules 6 4. CONNECTION AND START-UP 6 4.1 Connecting the mechanical system Any safety hazards stemming from the device must be re-evaluated once it is installed in the end device. Observe the following when working on the unit:

6 4.2 Connecting the electrical system Translation of the original operating instructions 7 4.3 Connection in terminal box ; Do not make any modifications, additions or conversions to the device without the approval of ebm-papst. 8 4.4 Factory settings 9 4.5 Connection screen 1.4 Electrical voltage 10 4.6 Checking the connections ; Check the electrical equipment of the device at regular intervals, refer 10 4.7 Switch on device 10 4.8 Switching off the device ; Replace loose connections and defective cables immediately. to chapter 6.2 Safety test. 10 5. INTEGRATED PROTECTIVE FUNCTIONS DANGER Electrical load on the device Risk of electric shock 11 6.

MAINTENANCE, MALFUNCTIONS, POSSIBLE CAUSES AND REMEDIES 12 6.1 Cleaning →Stand on a rubber mat if you are working on an electrically 12 6.2 Safety test WARNING Terminals and connections have voltage even with a unit that is shut off Electric shock charged device. →Wait five minutes after disconnecting the voltage at all poles before opening the device. ebm-papst Mulfingen GmbH & Co. KG · Bachmьhle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com K3G310-BB49-02 Operating instructions Item no. 51232-5-9970 · ENG · Revision 84855 · Release 2015-03-16 · Page 1 / 12

Page 1

CAUTION In the event of failure, there is electric voltage at the rotor and impeller The rotor and impeller are base insulated. DANGER Flying parts Missing safety devices may cause balancing weights or broken fan blades to be ejected at high speeds, causing bodily harm. →Do not touch the rotor and impeller once they are installed. CAUTION If control voltage is applied or a speed setpoint is stored, the motor automatically restarts, e.g. after a power failure. Danger of injury →Take appropriate safety measures. WARNING Rotating device Long hair, loose items of clothing and jewellery could become entangled and pulled into the device. You could be injured.

→Keep out of the danger zone of the device. →When working on the device, switch off the mains →Do not wear any loose clothing or jewellery while working on rotating parts. supply voltage and secure the latter from being switched on again. →Protect long hair by wearing a cap. →Wait until the device stops. →After working on the device, remove any used tools or 1.8 Emission other objects from the device. WARNING Depending on the installation and operating conditions, a sound pressure level greater than 70 dB(A) may arise.

Danger of noise-induced hearing loss 1.5 Safety and protective functions DANGER Missing safety device and non-functioning safety device If there is no safety device, you could be seriously injured, for example if you reach into the running device or your hands are sucked into it. →Take appropriate technical safety measures. →Protect operating personnel with appropriate safety →Also observe the requirements of local agencies. equipment, e.g. hearing protection. →Operate the device only with a fixed and isolating safety protection and a fixed guard grille. The guard must withstand the kinetic energy of a fan blade detaching at maximum speed.

1.9 Hot surface CAUTION High temperature at the electronics enclosure Danger of burn injuries →The device is a built-in component. You, the owner/ operator, are responsible for providing adequate protection for the device. →Ensure that sufficient protection against accidental contact is provided. →Shut down the device immediately if you detect a missing or ineffective protective feature. 1.10 Storage 1.6 Electromagnetic radiation ; Store the device, partially or fully assembled, in a dry and Interference from electromagnetic radiation is possible, e.g. in conjunction with open and closed-loop control devices.

If unacceptable emission intensities occur when the fan is installed, appropriate shielding measures have to be taken by the user. ; Protect the device from environmental impacts and dirt until the final weatherproof manner in the original packing in a clean environment. installation. ; We recommend storing the device for a maximum up to one year to guarantee proper operation and longest possible service life. Translation of the original operating instructions NOTE Electrical or electromagnetic interferences after integrating the device in installations on the customer's side. ; Even devices explicitly suited for outdoor use are to be stored as described prior to being commissioned.

; Maintain the storage temperature, see →Verify that the entire setup is EMC compliant. ; Please make sure that all screwed cable glands are fitted with chapter 3.6 Transport and storage conditions. 1.7 Mechanical movement dummy plugs. DANGER Rotating device Body parts that come into contact with the rotor and impeller can be injured. 1.11 Disposal When disposing of the device, please comply with all relevant requirements and regulations applicable in your country. →Secure the device against accidental contact. →Before working on the system/machine, wait until all parts have come to a standstill. ebm-papst Mulfingen GmbH & Co.

KG · Bachmьhle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com K3G310-BB49-02 Operating instructions Item no. 51232-5-9970 · ENG · Revision 84855 · Release 2015-03-16 · Page 2 / 12

Page 2

2. PROPER USE The device is exclusively designed as a built-in device for conveying air according to its technical data. Any other usage above and beyond this does not conform with the intended purpose and constitutes misuse of the device. Customer equipment must be capable of withstanding the mechanical and thermal stresses that can arise from this product. This applies for the entire service life of the equipment in which this product is installed. Proper use also includes: Use the device in power systems with earthed neutral (TN/TT power systems) only. Only using the device in stationary systems. Carrying out all maintenance. Moving air with a density of 1.2 kg/mі.

Using the device in accordance with the permitted ambient temperature, see chapter 3.6 Transport and storage conditions and chapter 3.2 Nominal data. Operating the device with all protective features in place. Minding the operating instructions. Improper use Using the device in the following ways is particularly prohibited and may cause hazards: Operating the device with an imbalance, e.g. caused by dirt deposits or icing. Operation in medical equipment with a life-sustaining or lifesaving function. Operation with external vibrations. Moving solids content in flow medium. Painting the device Connections (e.g. screws) coming loose during operation. Opening the terminal box during operation.

Moving air that contains abrasive particles. Moving highly corrosive air, e.g. salt spray mist. Exceptions are devices that are intended for salt spray mist and protected accordingly. Moving air that contains dust pollution, e.g. suctioning off saw dust. Translation of the original operating instructions Operating the device close to flammable materials or components. Operating the device in an explosive atmosphere. Using the device as a safety component or for taking on safety- related functions. Operation with completely or partially disassembled or modified protective features. In addition, all application options that are not listed under proper use. ebm-papst Mulfingen GmbH & Co.

KG · Bachmьhle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com K3G310-BB49-02 Operating instructions Item no. 51232-5-9970 · ENG · Revision 84855 · Release 2015-03-16 · Page 3 / 12

Page 3

3. TECHNICAL DATA 3.1 Product drawing All measures have the unit mm. Translation of the original operating instructions ebm-papst Mulfingen GmbH & Co. KG · Bachmьhle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com K3G310-BB49-02 Operating instructions 1 Inlet nozzle with bleeder connection for pressure relief (k-factor: 116) 2 Cable diameter: min. 4 mm, max. 10 mm, tightening torque: 4±0.6 Nm 3 Tightening torque 3.5±0.5 Nm 4 Mounting position: shaft horizontal (install the support struts only vertically as shown in the view!) or rotor on bottom; rotor on top on request Item no.

51232-5-9970 · ENG · Revision 84855 · Release 2015-03-16 · Page 4 / 12

Page 4