[Public] 56268 Rev. 1.05 November 2021 AMD NVMe/SATA RAID Quick Start Guide for Windows Operating Systems Chapter 1 General Information 1.1 Purpose This Quick Start Guide is designed to assist with system setup in RAID Mode , by performing these general procedures: Copy AMD RAID device drivers to removable storage media for Microsoft ® Windows x64. Load AMD RAID device drivers on a system during Windows operating system installation. Install the AMD-RAIDXpert2 (GUI) for RAID array management. 1.2 System Requirements Table 1. System Requirements Chapter 1 General Information 7 Component Requirements Memory (RAM) Minimum: 16 GB total for AMD Ryzen® processors and AMD Ryzen® desktop processors.
Recommended: 32 GB total for AMD Ryzen® processors and AMD Ryzen® desktop processors. Hard Disk, SSD Total 14 devices Support includes ATAPI DVD, SATA drives, SATA SSD drives, M.2 SATA drives, NVMe M.2 devices, NVMe HHHL devices or NVMe U.2 devices. The number of disks depends on the number, type, and capacity of the arrays to be created. Max number of NVMe devices 10 Max Controller Count 11: Two controllers with device ID 0x7917, one controller with device ID 0x43BD and NVMe (one controller per NVMe) 11:
One controller with device ID 0x7916, one controller with device ID 0x43BD and NVMe (one controller per NVMe) Supported AMD Processors 3rd Gen AMD Ryzen™ Threadripper Processor 3rd Gen AMD Ryzen™ Desktop Processor 2nd Gen AMD Ryzen™ Threadripper™ Processor 2nd Gen AMD Ryzen™ Desktop Processor AMD Ryzen™ Threadripper™ Processor AMD Ryzen™ Desktop Processor AMD Ryzen™ Desktop Processor with Radeon™ Vega Graphics Supported AMD Chipsets AMD X570 Chipset AMD X370 Chipset AMD X470 Chipset AMD B350 Chipset AMD X399 Chipset AMD A320 Chipset AMD B450 Chipset AMD TRX40/WRX80