Univers EMS User Manual Rev. 1.3.1 4. When the parameter is updating, the user can choose to: a. wait on the current page or b. click [Confirm] to leave temporarily and come back later to check the parameter. 5. If the user chooses to wait on the current page, the update will take a few minutes. After the parameter is updated, the pop-up window will show the result: Command issue successful/failed . 6. If the user chooses to leave temporarily, the user can come back to the parameter setting page later after 5mins, if parameter was set successfully, the parameter value will be updated. Operation & Management Pre-requisite: You are using a System Admin/Installer Admin/Installer account.
Active Alarm On the Active Alarm page, all alarm information under the power plant is displayed in real time, including alarm generation time, alarm power plant, device, alarm level, alarm category, and alarm description. Page 150 of 176