Kaiyi — Univers EMS User Manual

Univers EMS User Manual Rev. 1.3.1 Device Parameter Setting 1. Go to the [Management] page and switch to the [Devices] tab. 2. Choose a device that you need to set the parameter. For dongle , you can modify the operation mode and working mode. For inverter , you can modify the power parameters, operation mode, characteristic parameters, and other parameter settings. For battery , you can modify the charge and discharge mode, charge and discharge power and other parameter settings. For meter , you can modify the meter direction. 3. You will be directed to the device information page, press the […] button on the top right-hand corner and then press [Parameter setting] button. Page 81 of 176