Accessories Plug-in connector acc. DIN EN 175301-803 with / without bridge rectifier depending on the voltage The 2-pole plug-in connector with protective lead is a connection spe- cially designed for electro-magnetic devices. Model •• Type 430006 without integrated bridge rectifier The cable outlet can be rotated 4 x 90° by inserting the contact carrier accordingly. After attaching the plug-in connector to the pin plate of the device plus sealing it is secured with a machine screw supplied. This guarantees an exact seal of the combination and prevents the plug-in connector from being accidentally detached under vibration.
•• Type 430001 with integrated bridge rectifier A cable gland Pg 11 (material no. 430006) serves to seal the cable. The contact elements are suitable for connecting-wire cross sections of up to 1.5 mm2. Air clearance and leakage paths acc. VDE 0110. Technical Data ■ ■ Insulation class C ■ ■ Protection class IP 65 (in plugged in and secured condition) ■ ■ Plug load 2.5 A Dimension Drawing (Plug-in connector design A) 22