Connections Connecting to a TV with Component input terminal Connecting to a TV with Component input terminal Refer to " TV Output Select (only for Europe) " on page 17. Video cord TV Audio cord Rear panel example (for Europe) Preparations Component cords (Commercially available) Connecting to an Audio component Connecting to an Audio component For playback of DTS audio, please connect an AV receiver or an AV amplifier which can decode DTS by digital connection.
Audio cord Coaxial cable Optical cable TV Rear panel example (for Europe) R L INPUT DIGITAL INPUT AUDIO VIDEO COAXIAL OPTICAL Video cable or Component cords (Commercially available) AV receiver or AV Amplifier Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic II / Pro Logic: Connect the left and right AUDIO OUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cords. Amplifier equipped with 2-channel digital stereo (PCM) or a multi-channel decoder (Dolby Digital™ or DTS): Connect one of the DVD Player's DIGITAL OUT jacks (COAXIAL/OPTICAL) to the corresponding in jack on your amplifier.
Use a digital (co- axial/optical) cable. Select "Bitstream" if you connect the DVD player to an amplifier or other equipment with a multi-channel decoder. (See page 17.) DTS disclaimer clause When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digi- tal output (S/P DIF, AES/EBU, or TosLink) of the DVD player. Notes:
• In case an associated system component is connected, also read the instruction manual of the component. • If the audio format of the digital output does not match the capabilities of your receiver (amplifier), the receiver produces a strong, distorted sound or no sound at all. 12 DVF-5500