Set Up functions Preparation for Set Up To display and exit the Menu To display and exit the Menu 1 Press the [SETUP] key to display the menu. A sec- ond press of the [SETUP] key will take you back to initial screen. POWER POWER To go to the next level: Press the Cursor right [ 3 ] key. To go back to the previous level: Press the Cursor left [ 2 ] key. General Operation General Operation Preparations 1 Press the [SETUP] key. • The Setup menu appears. 2 Use the Cursor up/down [ 5 / ] keys to select the desired option, then press the Cursor right [ 3 ] key to move to the second level. • The screen shows the current setting for the selected item, as well as alternate setting(s).
1 Press the [POWER] key to power on. 2 Set Video Format according to the connected TV type. (Refer to "To select TV Type" on page 9.) • If the video formats of the disc and TV do not match, press and hold [ 8 ] key for more than 5 seconds to be able to select a TV type (PAL or NTSC). (No disc inserted) 3 Use the Cursor up/down [ 5 / ] keys to select the second desired option, then press the Cursor right [ 3 ] key to move to the third level. Note: When the power cord is plugged, wait for several seconds, and then switch the power on. 4 Use the Cursor up/down [ 5 / ] keys to select the desired setting, then press the [ENTER] key to confirm your selection. Some items require ad- ditional steps.
Set up menu By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 17 to 19. 5 Press the [SETUP] key or [ Ј ] key to exit the Setup menu. ENTER SETUP 16 English