Table 3-8. Paper Handling Menu (continued) 106 Chapter 3 Operating Overview C4265-90907 Item PAPER DEST= STANDARD OUTBIN Values STANDARD OUTBIN LEFT OUTBIN OPTIONAL BIN Explanation This item appears when an output device is installed. Set the value to correspond to the appropriate bin. Additional output bins appear in the menu with the installation of output devices. MANUAL FEED=OFF OFF ON Feed the paper manually from Tray 1, rather than automatically from a tray. When MANUAL FEED=ON and Tray 1 is empty, the printer goes offline when it receives a print job and displays MANUALLY FEED [PAPER SIZE]. *DUPLEX=OFF OFF ON This item appears only when a duplexer is installed.
Set the value to ON to print on both sides (duplex) or OFF to print on one side (simplex) of a sheet of paper. BINDING= LONG EDGE LONG EDGE SHORT EDGE This item appears only when an optional duplexer is installed and the duplex option is on. Choose the binding edge when duplexing (printing on both sides of paper). OVERRIDE A4/LETTER=NO NO YES Choose YES to print on letter-size paper when an A4 job is sent, but no A4-size paper is loaded in the printer (or to print on A4-size paper when a letter job is sent, but no letter paper is loaded in the printer). PRINT TEST PAGE TRAY=ALL ALL 1 2 3 4 HP LaserJet 8150 series only.
This item appears only when an external input paper handling device is installed. An edge-to-edge calibration page will print for the tray selected. TRAY X SHIFT=NONE NONE LEFT 1 LEFT 2 LEFT 3 RIGHT 1 RIGHT 2 RIGHT 3 HP LaserJet 8150 series only. This item appears only when an external input paper handling device is installed. Allows you to set a value that will shift the placement of an image to the left or right on the page.