Duplex Registration Menu The duplex registration menu is available in the HP LaserJet 8150 Series. The items in this menu will assist you in aligning the images on the front and back of a duplexed page by calibrating Tray 2, 3, or 4. This feature is not available for Tray 1. You will need to repeat the following items for each tray. Table 3-15. Duplex Registration Menu Item Explanation TRAY n PRINT TEST PAGE Print a test page for Trays 2, 3 or 4 (a test page will print for Tray 4 only if an external input device is attached, and Tray 5 will be aligned from performing the instructions for Tray 4 if you have the external 2x500 Input Tray installed).
TRAY n X=0 0 is the X offset for the second side of the duplexed page for pages coming from Tray n . the registration marks range from -5 to +5 . TRAY n Y=0 0 is the Y offset for the second side of the duplexed page for pages coming from Tray n . The registration marks range from -5 to +5 . The duplex registration feature allows precise alignment of images on the front and back of a duplexed page. Image placement varies slightly for each input tray. The alignment procedure must be performed for each tray. 1 Press M ENU until DUPLEX REGISTRATION MENU appears on the printer control panel display. 2 Press I TEM until PRINT TEST PAGE appears for the tray you want.
3 Press S ELECT to print the page. 4 Hold the printed page up to a light source and choose the number on each axis where the lines on the front and back of the page align most accurately. 5 Repeat step 1. 6 Press I TEM until TRAY n X= appears and use -V ALUE + to enter the number you selected from the test page in step 4. Press S ELECT to save this value. 7 Repeat step 6 for the Y axis. 8 Press I TEM to scroll up through the duplex registration menu until PRINT TEST PAGE appears for the tray you want. 9 Press S ELECT to print the page. C4265-90907 Printer Control Panel Menus 123