8-bin Mailbox/5-bin Mailbox with Stapler 1 With the printer turned off and unplugged, disconnect the power cable and C-link cable from the input device and power box. 2 Carefully slide the 8-bin Mailbox/5- bin Mailbox with Stapler away from the printer until the locator tabs and the lower guide rail are clear. See Figure 2. 3 Press in the green tabs and remove the bracket installed underneath the input device. See Figure 3. To Reinstall: 1 Reinstall bracket underneath input device.Reinstall C-link and power cables. See Figure 1. Note Attach and secure the C-link cable to the lower connector on the input device.
Route the mailbox’s power cord beneath the printer to the transfer-door side of the printer and connect it to the bottom of the powerbox. 262 Chapter 6 Removal and Replacement C4265-90907