HP — Hinges

Hinges Figure 6-189 Hinges 1 Remove the Stapler Assembly (see figure 6-180 on page 477). 2 Remove the Top Cover Assembly (see figure 6-187 on page 484). 3 Remove the Stapler Bed Assembly (see figure 6-188 on page 485). 4 Release the brushes bar from the retaining notches, and lift upwards. 5 Remove 2 screws joining each hinge to the housing (see figure 6-189, callout 1). 6 Disconnect the 2 cables in the hinge containing cables from the Stapler Controller PCA (see figure 6-185 on page 482, callout 2). C4265-90907 Stapler Assembly Removal and Replacement 487