Installing the HP Digital Copier Install the HP Digital Copier on the Optional HP Digital Copier Stand For detailed instructions on setting up the HP Digital Copier Stand, see the installation guide that came with the installation of the accessories. See “Space Requirements” on page 81 for WARNING! 2 With one other person, lift the HP Digital Copier and align it with the screws on the HP Digital Copier Stand. 3 With a flathead screwdriver, screw the HP Digital Copier onto the stand. 490 Chapter 6 Removal and Replacement C4265-90907 1 1 Place the HP Digital Copier Stand near the desired location. Note Be sure to leave space for the 2 dimensions.
It is also important to leave space between the stand and the desired location to allow access to the cables during installation. 3 Use caution when completing the following steps. Once you place the HP Digital Copier on the stand, bumping or moving may cause it to tip. The printer must be moved into position immediately after installation of the HP Digital Copier is complete.