Install the Optional Output Accessory Note For detailed information on installing the optional output accessory, see the installation guide that came with the accessory and the online user guide that came with the printer. 1 Roll the optional output accessory onto the HP Digital Copier Stand. Note Be sure to properly align the mounting bracket as you roll the optional output accessory onto the HP Digital Copier Stand. 2 After the front two rollers are on the base of the HP Digital Copier Stand, attach the mounting bracket (called out below). 3 Roll the optional output accessory toward the printer until it clicks into place.
mounting bracket Figure 6-190 Optional Output Accessory Note Be sure to leave enough space to completely extend the optional output accessory away from the printer. See “Space Requirements” on page 81. For cabling information, see “Communication Link (Daisy Chain)” on page 233. C4265-90907 Installing the HP Digital Copier 493