Figure 6-198 Pick Rollers (2 of 2) 4 Lift out the rear end of the roller and release the shaft from the hole in the front. Lift out the entire roller and shaft assembly. CAUTION Do not touch the rubber part of the new rollers. Skin oils or gear lubricant can damage the rollers. Note Important! Retain the brass bushings. Replacement Pick Rollers include the white collar but not the bushings. When you replace the brass bushings on the roller, note that they are keyed flat on the sides to fit correctly in the holes. 5 Remove the front and rear brass bushings if they are not worn and place them on the new roller. Note To remove the second roller, follow the steps above.
Note the difference between the rollers to replace the correct roller in its place. C4265-90907 Copy Module Maintenance Parts 503