HP — Front Panel

Figure 6-212 Unplugging the Ribbon Cable 7 To release the Ribbon Cable, use your fingernail to gently pull up each end of the connector (callout 1). Unplug the ribbon cable. Note the orientation of the contacts on the cable so the cable is not twisted. To replace 1 Plug the cable into the connector. When the cable is inserted in the connector, the contacts point toward the middle of the Front Panel as shown in Figure 6-211. This also allows the cable to lie flat. 2 Press down the upper center of the Front Panel to engage the tabs as you push the Front Panel to the left, into place. 518 Chapter 6 Removal and Replacement C4265-90907