HP — Upper Cover

Figure 6-217 Upper Cover (2 of 2) 2 Remove 3 screws [two TP screws (m3x6) and one TP screw (m3x8)]. Note For replacement, the screws in the ADF are longer. The ADF is shown open to locate the screws. Always close the ADF to remove the Upper Cover. CAUTION Be careful of the LED PCA and Front Panel ribbon cable when you remove the cover. 3 Lift the Upper Cover straight up to remove it. To replace Carefully feed the Front Panel ribbon cable through the slot. C4265-90907 Copy Module Skins 523