HP — Carrier Unit

Figure 6-251 Carrier Unit (2 of 2) 2 Move the Carrier to the center (callout 1). 3 Pull out the Carrier Shaft. Cleaning and Lubricating the Carrier Unit Shaft 1 If the Carrier Unit Shaft is dirty, wipe it off with a cloth, then relubricate it (see below). Otherwise, be careful not to remove the lubricant. 2 Place an even coating of Terrace Oil 46 (light weight oil) on the Carrier Unit Shaft as needed (for example, if paper dust or other material interferes with movement of the Carrier Unit, or if you have cleaned the shaft). C4265-90907 Copy Module Flatbed Assemblies 559