Step 2. Display The Control Panel should display READY , OFFLINE , or POWERSAVE ON . For information about errors displayed, access the Event Log. If the display is blank, see Power On Defects or Blank Display on page 594. Event Log Pages Use the Event Log to diagnose and troubleshoot printer errors and intermittent failures. You can either print or display the Event Log from the Control Panel’s Information Menu. (Select PRINT EVENT LOG or SHOW EVENT LOG .) (The Configuration Page lists the maximum number of entries in the Event Log.) See figure 7-11 on page 600 for a sample page one of the Event Log.
Page one of the Event Log shows the current page count at the left side of the page, with the printer's serial number directly to the right of the page count. The left column is the error sequence number, with the error listed on the right (the highest sequence number is the most recent event logged). The next column is the page count at the time of the error, and the last column is the Personality (PCL or PostScript) column or the Jam Cause at the time of the error. Note The HP LaserJet 8100 series Event Log consists of one page only. The HP LaserJet 8150 series Event Log contains two pages. 598 Chapter 7 Troubleshooting C4265-90907