Table 7-5. Engine Error Messages (continued) C4265-90907 Printer and Paper-Handling Devices Messages 615 Control Panel Message Event Log Error Message Description Recommended Action 59.x PRINTER ERROR Critical Error A printer error has occurred. X Description 0 Motor error. 1 Motor startup error. 2 Motor rotation error. Turn the printer off, and then turn the printer on. 62.x PRINTER ERROR Critical Error There is a problem with the printer’s memory. The x value refers to the location of the problem: 0 = Internal memory 1 to 3 = DIMM slots 1, 2, or 3 Reseat or replace the specified DIMM. 64 PRINTER ERROR Critical Error A scan buffer error occurred.
Turn the printer off, and then turn the printer on. If this message persists, replace the Formatter. 68 NVRAM ERROR CHECK SETTINGS Error An error occurred in the printer’s nonvolatile memory (NVRAM) and one or more printer settings has been reset to its factory default. 1. Print a configuration page and check the printer settings to determine which values have changed. 2. Remove EIO card. It will be reset if not removed. 3. Hold down CANCEL JOB while turning the printer on. This will clean up the NVRAM by removing old areas that are not being used. 68 NVRAM FULL CHECK SETTINGS Error The printer’s nonvolatile memory (NVRAM) is full. Some settings might have been reset to the factory defaults.
1. Print a configuration page and check the printer settings to determine which values have changed. 2. Remove EIO card. It will be reset if not removed. 3. Hold down CANCEL JOB while turning the printer on. This will clean up the NVRAM by removing old areas that are not being used. 69.x PRINTER ERROR Critical Error A temporary printing error occurred. X Description 0 The duplex mechanism has failed. 1 The duplex slide adjust has failed. 1. Turn the printer off, and then turn the printer on. 2. Reseat the duplexer.