Operating Environment The electrical specifications listed in table 2-4 on page 87 must be maintained to ensure proper operation of this printer. Consider the following points before installing the printer. G Install the printer in a well-ventilated, dust-free area, away from any open windows. G Install the printer and peripherals on a hard, flat, and continuous surface, with all feet level. Do not install on carpet or other soft surfaces. We recommend the use of the HP Digital Copier with the HP Digital Copier Stand. G Ensure adequate, stable power is supplied. Printer power requirements are listed in table 2-4, “Electrical Specifications,” on page 87.
G Install the printer where there is stable temperature and humidity, away from water sources, humidifiers, air conditioners, refrigerators, or other major appliances (see table 2-1 on page 84). G Install the printer away from direct sunlight, open flames, or chemicals. If the printer is placed near a window, make sure the window is closed and has a curtain or blind to block any direct sunlight. G Install the printer with enough space around the MFP package for proper access and ventilation (see “Space Requirements” on page 81). G Install the MFP package away from the direct flow of exhaust from air ventilation, heating, or air conditioning systems.
Note Be sure to leave enough space to completely extend the optional output accessory away from the printer. 80 Chapter 2 Site Requirements C4265-90907