Руководство по эксплуатации Kuhnke D6 Rotary Solenoid (EN)

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk D6 Series Rotary Solenoid * By using a cooling surface 600 cm 2 , the permissible duty cycle can be extended up to 1.7x normal rating M A = Initial torque M E = End torque (5 ° before end of rotary angle) Coil terminals: - Flying leads - Solder terminal box (6.3 DIN 46247) Weight: appr. 600 g Dyn. moment of inertia (rotational mass): appr. 3.5 10 --6 kg m 2 Time constant: appr. 10–30 ms All solenoids with M A > 4.8 Ncm are available with spring return, with a rating of M R = 4.0 Ncm approximately. The operational voltage of 205 V DC results from rectifying 230 V AC with a bridge rectifier.

Document RSD600/13 Revision 00 2 Ш8 h9 5 M4 20 ± 0,5 Ш60 Ш40 Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Voltage ratin g V DC 24 205 V DC V oltage rating ED* LK % 100 44 27 17 5 100 34 20 12 5 % ED* LK Current ratin g A 0,56 1,13 1,75 2,70 8,60 0,54 0,165 0,279 0,430 0,980 A C urrent rating Nominal resi stance  42,7 21,3 13,7 9,0 2,8 3.818 1.241 735 476 209  Nomin al resistance D 62, 25° MA Ncm 12,0 25,0 21,0 31,0 24,5 34,5 28,5 38,0 40,0 44,5 11,0 23,0 21,5 31,0 25,5 35,0 29,5 38,0 38,0 44,0 Ncm MA D 62, 25° ME Ncm Ncm ME D 63, 35° MA Ncm 9,0 22,0 15,5 27,0 19,0 30,0 23,0 32,0 33,0 36,0 7,5 20,0 16,0 27,0 21,0 30,0 24,0 32,0 31,0 35,5 Ncm MA D 63, 35° ME Ncm Ncm ME D 64, 45° MA Ncm 6,0 20,0 11,5 25,0 15,0 27,0 19,0 29,0 28,5 30,5 5,0 19,0 12,0 25,0 16,0 27,0 20,0 29,0 27,0 30,5 Ncm MA D 64, 45° ME Ncm Ncm ME D 66, 65° MA Ncm 3,2 19,5 7,4 23,0 10,5 24,0 14,5 25,0 23,5 24,0 2,6 17,5 7,5 23,0 11,0 24,0 15,0 25,0 22,0 24,0 Ncm MA D 66, 65° ME Ncm Ncm ME D 69, 95° MA Ncm 1,3 15,0 3,3 17,0 4,7 17,0 7,0 16,6 13,2 14,2 1,1 14,2 3,2 17,0 5,2 17,0 7,6 16,6 12,0 14,0 Ncm MA D 69, 95° ME Ncm Ncm ME 41,5

Стр. 1

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk D6 Series Ordering Information Rotary solenoids Order specifications Angular travel 25 ° 35 ° 45 ° 65 ° 95 ° Shaft and rotation options Coil terminals Terminal box 3) Flying leads (20 cm standard length) Nominal voltage Standard voltage (connected to 230 V AC with Si-bridge rectifier) Perm. duty cycle under air cooled conditions (LK) 3) Suits push-on connector 6.3 DIN 46247 and plug-in socket No. Z801. Insulation class: B (max. permissible temperature = 130 ° C) Test voltage: 2500 V (eff) (D 2: 1500 eff) Plug-in socket Z801 Accessories:

Document RSD600/23 Revision 00 2 41,0 10,0 Plug-in socket Z801 Screw joint PG 9 for lead diameter 4.5 - 7 mm 5,5 34,2 Plug-in socket Z811 Screw joint PG 11 for lead diameter 6 - 9 mm Plug-in socket with built in Si-bridge rectifier (30,5) Impulse Automation Limited United Kingdom Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. D 6 3 -ROR- - N - 24 V DC 100 % ED D 6 2 3 4 6 9 -ROR- F N 24 205 100 % ED Ø 1

Стр. 2

Email: sales@impulseautomation.co.uk Website: www.impulseautomation.co.uk D6 Series Shaft & Rotation Options Company Registration 665193 Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Normal Spring return LOO LOL LOR ROO ROL ROR BOO BOL BOR Spring return ØD LF Shaft designs The following types of rotary sole- noids are available. Resulting in the following abbrevia- tions for ordering: 1. letter Direction of rotation (facing the out put shaft) L anti-clockwise rotation R clockwise rotation B shaft extensions both ends 2. letter Centering shoulder O standard type without mounting ring R optional L optional 3.

letter Return spring – the torque exerted by the spring is to be subtracted from the torque values given in the data sheets L on the anti-clockwise shaft end R on the clockwise shaft end O no return spring fitted B both sides Example 1 anti-clockwise rotation, no return spring, standard shaft length LOO - Example 2 shaft extensions on both ends, return spring on anti-clockwise rotation en BOL - Spring return arrangement (with protection cap) - d 002 Revision RSD600/33 nt Spring return ØD LF Solenoid size 0 Mounting ring Dimensions in mm D6 h1 D M ounting ring Ø D 24,5 Ø LF 6,0 Ø Dh10 22,0 LZ LZ 3,0 e um c Do Normal Spring return LOO LOL LOR ROO ROL ROR BOO BOL BOR

Стр. 3