L-4533A/L-4533AW/L-4033A/L-4033AW Operation Guide Introduction Control panel Control panel (Left) Control panel (Right) Control panel (on front cover 2) (L-4533A/L-4533AW only) 16 Letter Name Explanation g Ceiling fan A fan for air intake. h Skew roller (Free roller C) Adjust the tilt so that the substrate is fed parallel to the platen. i Curl suppressor (two positions) Place at the edges of the substrate to prevent the substrate from curling. j Platen The platform where printing is performed. k Flushing unit Collects waste ink during head maintenance. l Top cover 1 Open when performing maintenance. The light on the other side of the cover turns on when it is opened.
(L-4533A/ L-4533AW only) m Control panel (Left) Switches and lamps for operating the press. U “Control panel” on page 16 Letter Name Explanation a EMERGENCY STOP switches (two positions) Push to immediately stop the press. b Feed switch Feeds the substrate while pushed down. c Slow Feed switch Slowly feeds the substrate while pushed down. Feeds 1 mm at a time if you press and immediately release the switch. (L-4533A/L-4533AW only) d Power lamp Lit when the breaker is on. e UPS lamp Lit together with the power lamp when the power is supplied to the Uninterruptible Power Supply (UPS). Lit without the power lamp when the power is being supplied by the UPS.