L-6534VW Operation Guide Basic Operations D If necessary, press Print Settings from the Job Management menu. You can change the preset and number of copies. When Perform Eye Mark Verification Printing is selected and reverse feeding is performed using eye marks, one copy is printed when printing starts, and the sensitivity of the eye mark sensor is adjusted automatically. When performing additional printing and Perform Eye Mark Verification Printing is selected, 1 copy is printed when printing starts, and you can check and fine tune the printing position. U “Print Settings/Reprint Settings Screens” on page 60 E Move the press switch from Standby to Ready .
An information sound chimes, and then printing starts. Also, the Paused screen is displayed in the following situations. After checking the settings and so on, press the Start switch to start printing. ❏ When Print Info. (eye mark for additional printing, Eye Mark Horizontal Offset, Eye Mark Pitch, and Eye Mark Sensor Position) settings do not match the loaded substrate. ❏ When Pause (Before Print) is set to Apply in the preset. 136