L-6534VW Operation Guide Basic Operations A In Head Maintenance in the Maintenance screen, press Manual Head Maintenance . B Based on the results of nozzle check patterns, select the color for head cleaning, and press Normal Cleaning . C Press Auto Nozzle Check or Print Nozzle Check Pattern . The following explains how to determine from the check results. D Select the color of head you want to clean, and then press Normal Cleaning or Power Cleaning . E Repeat steps 2 to 4 until the clogged nozzles are cleared. When the clogging is cleared, press Close . This completes this section. 155 Item Explanation Ready to Print/Image Quality Warning Displays whether or not nozzles are clogged.
If an image quality warning is displayed, head cleaning is necessary. (XX mins. later) Displays the time until the start of the next head cleaning. (4 digit numbers) Displays the number of clogged nozzles. Item Explanation Normal Cleaning Cleans the surface of the head and clears clogged nozzles. Power Cleaning Cleans the print head more powerfully when nozzles are still clogged even after performing head cleaning several times. If ink is low, prepare a new ink cartridge before performing this procedure because Power Cleaning consumes more ink than Normal Cleaning. If the nozzles are still clogged, also clean the head nozzle surface.
U “Head nozzle surface” on page 353 Ultra Power Cleaning Performs stronger cleaning to clear clogged nozzles. Run this if nozzles are not cleared even after repeated Power Cleaning.