L-6534VW Operation Guide Various Print Settings When Printing on Both Sides This section explains how to print on both sides of the substrate by detecting eye marks on the rear of the substrate using the reverse feeding and additional printing functions. Surface printing Rear surface printing Printed material of 2-sided printing Contents Surface printing U “Procedure for Surface Printing” on page 188 Perform settings for surface printing in Preset for Printing. In Preset for Reverse Feeding, select Use for the eye marks. Load the substrate so that the unwinder side unwinds clockwise and the rewinder side rewinds counter-clockwise. Perform surface printing.
Rear surface printing U “Procedure for Rear Surface Printing” on page 190 Enable additional printing in Preset for Printing. Change the printed substrate so that the unwinder side unwinds clockwise and the rewinder side rewinds counter-clockwise. On the rear surface of the substrate, perform eye mark detection and sensitivity adjustment for the eye mark sensor. 185