L-6534VW Operation Guide Various Print Settings Preparing for Printing through Processing the Data Midnight This product comes with a mode for data processing only that allows you to use just the controller PC to handle print data such as halftone processing. When processing print data such as variable printing takes a long time, this mode allows you to process print data efficiently if you do not need to make print operations such as at night. The following shows the standard workflow for data processing only.
Set operations when job received When you want to change the operation after the mode for data processing only is finished and you have restarted the press, you need to set the operation you want to perform when receiving a job in advance. 217 Contents Reference 1. Set operations when job received U “Set operations when job received” on page 217 2. Start mode for data processing only U “Start mode for data processing only” on page 218 3. Process data U “Process data” on page 219 4. Finish mode for data processing only U “Finish mode for data processing only” on page 220 5. Start the press U “Starting the Press” on page 221 6. Print U “Print” on page 221