L-6534VW Operation Guide Various Print Settings A Change the press breaker to OFF . B Change the press breaker to ON . After starting up, wait until the pilot lights flash three times. C Press the PC Only switch. The mode for data processing only starts. D Press Operation Status from the menu on the left of the touch panel, and then set Shutdown when Data Processing Complete . When Shutdown when Data Processing Complete is set to On , the press shuts down automatically after processing the data for all jobs. Process data For jobs with data processing, perform printing as normal. U “Start Printing” on page 134 ❏ Divide data so that it does not exceed the maximum data length (800 m). 219