L-6534VW Operation Guide Overview of the Product Rear section 23 Letter Name Explanation j Top front cover Open when the substrate is jammed or when performing maintenance. k Main panel Turns the tension for the rewinder axis ON/OFF, and performs operations for the substrate feeder. U “Control panel” on page 27 l Rewinder roll cover Open when removing the printed roll substrate. m Additional UV lamp curing unit Performs additional UV curing when the ink is not cured sufficiently on the substrate with the UV curing for the main press. n Control panel (rewinder side workbench) Turns the tension for the rewinder axis ON/OFF, and performs operations for the substrate feeder.
U “Control panel” on page 27 o Rewinder side workbench Place to check or cut off print results. p Touch panel Touch panel display. You can move this to adjust the angle and position. Letter Name Explanation a Main unit exhaust duct Exhausts heat generated in the main unit. Make sure this exhausts to outside the building. b Additional UV lamp curing unit duct Exhausts ozone and heat that are generated by the additional UV lamp curing unit. Make sure this exhausts to outside the building.