L-6534VW Operation Guide Maintenance Corona treater If the interior of the corona treater or substrate path channel are soiled or in an abnormal condition, it could have an adverse effect on the printing results. Dust and moisture around insulators, cables, and electrodes can also cause errors. Remove dust from the gaps between the electrodes and so on to maintain good ventilation. c Important: ❏ When cleaning the surface of the roller, do not use hard materials such as tools. If the roller is damaged, the substrate may not be fed to the correct position, and color irregularities could be caused. ❏ Check that each section is not damaged or worn out.
If anything is damaged or worn out, contact service support. Corona rollers c Important: When using substrate to which glue sticks easily, perform additional inspections and cleaning between print jobs. 253 No. (Illustrati on) Inspection Points Inspection Frequency Mode Reference 1 Corona rollers Everyday Feed section U “Corona rollers” on page 253 2 Corona electrodes U “Corona electrodes” on page 256 3 Corona treating station Once a week U “Corona treating station” on page 259