L-6534VW Operation Guide Maintenance U “Corona electrodes” on page 256 G Remove slack from the substrate. H Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . This completes this section. Corona electrodes If you are performing this procedure after cleaning the corona rollers, go to step 4. A Press the OFF switch on the corona treater's control panel. B Open the front cover on the corona treater. C Pull out the electrode cartridge. D Use an air gun to blow off any paper dust or dirt that may have adhered to the electrode cartridge.
Clean the insulator (white) and cables carefully, as dust can easily remain on them. 256