EPSON — Checking the Cloth for the Web Cleaner

L-6534VW Operation Guide Maintenance F Remove the web cleaner from the press and check the condition of the cloth. If you notice any wrinkles in the cloth when viewing the removed web cleaner from the side, hold your finger to the edge of the cloth, unscrew the suppressor, and then adjust the position of the cloth to smooth out any wrinkles. G Install the web cleaner. H If the cloth is still in a poor condition even after repeating steps 2 to 4, replace the cloth. U “Replacing the Cloth for the Web Cleaner” on page 271 I Rotate the unwinder axis to wind up the loosened substrate.

270 Poor condition There are parts of the cloth that cannot be viewed from the side of the feed direction of the web cleaner. Go to step 6.