L-6534VW Operation Guide Overview of the Product Pilot lamp Informs the users of the status of the press with an alarm sound and lamp. 28 Letter Name Explanation e Slow Feed switch Slowly feeds the substrate while pushed down. The Slow Feed switch is also located on the rewinder side workbench. This is useful for adjusting the position of the substrate on the rewinder side workbench. f Feed switch Feeds the substrate while pushed down. g Power lamp Lit when the breaker is on. h Pause switch Push to pause printing. i Start switch Push to start printing. j Feed Ready switch Turns the tension for the rewinder axis ON/OFF. The Feed Ready switch is also located on the rewinder side workbench.
This is useful for cutting off the substrate on the rewinder side workbench. k PC Only switch Push to process print data, such as half-tone processing, without printing. Use this when processing large amounts of images of print data for variable printing and so on. l Key switch Changes the status of the press. m UPS lamp When the Power lamp and the UPS lamp are on, the press is on and power is being supplied from an uninterruptable power supply. When the Power lamp is off and the UPS lamp is on, the press is off but power is being supplied from an uninterruptable power supply. Letter Name Explanation a Red lamp Lit when an error occurs or the press is in a dangerous status.
b Yellow lamp Lit when an error occurs and actions need to be taken.