EPSON — Ionizer/Foreign Substance Detection Roller

L-6534VW Operation Guide Maintenance I Use a dry cleaning stick to wipe off any alcohol for cleaning the rollers that remains on the parts you cleaned. c Important: Do not leave any parts wet with alcohol for cleaning the rollers. J Open the unwinder roll cover, and then loosen the substrate on the unwinder axis side. K Rotate the drum, and then feed the substrate in the feed direction. L Raise the substrate, and then clean the lower ionizer. Perform steps 6 to 9. M Rotate the unwinder axis to wind up the loosened substrate. N Close the unwinder roll cover. O Return the upper ionizer, and then secure it with the screw. After inserting the interior pin in the hole, secure it at the front.

P Install the web cleaner in its previous position. 297