EPSON — Rewinder side rollers

L-6534VW Operation Guide Maintenance G Clean drive roller B. Dampen the polyester/nylon knit woven fabric with the alcohol for cleaning the rollers, and while rotating the roller using the handle, wipe off any paper powder, dust, glue, and so on. When substrate is loaded, lift it up a little and wipe underneath. Note: If it is very dirty, with the polyester/nylon knit woven fabric dampened with the liquid for ink cleaning or the nylon brush wipe off any paper powder, dust, glue, and so on. Next, wipe with the polyester/nylon knit woven fabric dampened with the alcohol for cleaning the rollers. H Return nip roller B to its original position.

(1) Place the shaft of nip roller B at the front U-shaped groove. Point the flange surface of nip roller B to the front, insert the flange into the hole on the frame, and then place the shaft of nip roller B at the front U-shaped groove. 310