L-6534VW Operation Guide Maintenance Q Close the rewinder roll cover and the top front cover on the press. R Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . This completes this section. Paper edge sensor/Joint sensor A When substrate is loaded, remove it from the sensor section on the unwinder side workbench. B Rotate the screw that secures the plate for the sensor on the unwinder side workbench. C Remove plate A on the top, and then clean the base.
Dampen the polyester/nylon knit woven fabric with the alcohol for cleaning the rollers, and then wipe off any paper powder, dust, glue, and so on. 314