EPSON — Additional UV lamp curing unit air intake filters

L-6534VW Operation Guide Maintenance E Lower the additional UV lamp curing unit. If you are going to perform the additional UV curing lamp unit scrap paper check or to clean the additional UV curing lamp unit silica glass base next, go to the appropriate item without lowering the additional UV curing lamp unit. U “Additional UV lamp curing unit irradiation part/Silica glass base/Scraps of paper check” on page 320 F Remove slack from the substrate. G Close the additional UV lamp curing unit lamp cover, and then close the cover at the bottom of the additional UV lamp curing unit.

If you need to clean the additional UV curing lamp unit air intake filters, it is more efficient to continue the procedure without closing the cover. Go to the appropriate item. U “Additional UV lamp curing unit air intake filters” on page 324 H Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . This completes this section. Additional UV lamp curing unit air intake filters If you are performing this procedure the additional UV lamp curing unit rollers, go to step 2. 324