EPSON — Replacing the additional UV curing lamp

L-6534VW Operation Guide Maintenance F Install the new lamp in its previous position. c Important: Make sure you wear plastic gloves so that you do not get fingerprints on the new lamp. G Reconnect the wiring connectors. You can connect these two wiring connectors to either plug. H Install the cover plate, turn the knob on the lock nuts to the side, and then press to secure it in place. I Check that there are no tools or jigs left inside the additional UV lamp curing unit. c Important: Do not leave any foreign substances inside the additional UV lamp curing unit. Print quality may decline, or fire could occur.

J Close the additional UV lamp curing unit lamp cover, and then close the cover at the bottom of the additional UV lamp curing unit. K When the press is reset, the lighting hours for the additional UV curing lamp are also reset. On the touch panel, press Maintenance - Press Settings - Press Information - Lighting Hours - Reset . This completes this section. 330