EPSON — UV air filters

L-6534VW Operation Guide Maintenance F Align the bottom of the filter frame with the groove, and then fix the filter with the clamp lock at the top. G Close the bottom front cover. H Check that there are no tools or jigs left inside the press. c Important: Do not leave any foreign substances inside the press. Print quality may decline, or the head could break down. You need to replace the head if it breaks down. I Close the top front cover on the press. J Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . If you are going to clean the UV air filter, go to the appropriate item.

U “UV air filters” on page 333 This completes this section. UV air filters Clean the UV air filters for the intake vent. Replace if they are too dirty. A Remove the intake vent filters (4 locations) from the top. Push rearward the front side of the filter frame. While lifting the corners on the rear side remove the filter. Caution: When removing the intake vent filters from the top, use a stepladder and take care not to fall. 333