L-6534VW Operation Guide Maintenance (2) Use a dry cleaning stick to wipe away any remaining cleaning liquid for ink cleaning. Use one cleaning stick to wipe all of the pinnings for the light glass. Wipe all glass surfaces back and fourth twice each. G Wipe the light glass in curing unit 2 with the polyester/nylon knit woven fabric dampened with the liquid for ink cleaning. H Wipe the glass surface that you cleaned with the dry polyester/nylon knit woven fabric. I Close the top rear cover, the left rear cover, and the right rear cover on the press.
When cleaning the pinning light shield next, continue to the next item without closing the top rear cover, the left rear cover, or the right rear cover. U “Pinning light shields” on page 345 J Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . This completes this section. Pinning light shields If there is any ink deposits, paper powder, or cured ink on the pinning light shield, it may drop or fall while printing and stain the printing surface. 345