EPSON — Pinning light shields

L-6534VW Operation Guide Maintenance c Important: You can clean the pinning light shields with a cleaning stick that has been used for cleaning the glass of the pinning or curing unit. However, do not clean the glass of the pinning or curing unit with a cleaning stick that has been used for cleaning the pinning light shields. This may cause ink residue of the pinning light shields to adhere to the glass, leading to a decrease in the intensity of the pinning or curing, and having an adverse effect on the printing results. (2) Wipe off the pinning light shields at the outside (a), inside (b), and edge (c), in this order. Repeat cleaning until there is no ink stuck to the cleaning stick.

When ink adheres to the cleaning stick, replace it with a new one. (3) Remove any ink deposits or cured ink inside (b) the pinning light shields with the spatula. Insert a corner of the spatula into the back of the pinning light shield and drag it along while keeping it inserted to force out any accumulated ink or cured ink. 347