EPSON — Light shield bars, Pinning covers, Curing unit cover (1/2)

L-6534VW Operation Guide Maintenance C Close the top rear cover, the left rear cover, and the right rear cover on the press. When cleaning the light shield bars next, continue to the next item without closing the top rear cover, the left rear cover, and the right rear cover. U “Light shield bars, Pinning covers, Curing unit cover (1/2)” on page 349 D Add a check mark to the item you have inspected, and then go to the next item for inspection. When you have finished the inspection, press Finished . This completes this section.

Light shield bars, Pinning covers, Curing unit cover (1/2) If ink deposits accumulate on the light shield bars, they could touch the paper while printing and cause a paper jam, and have an adverse effect on the printing results. If you are performing this procedure after cleaning the pinning light shields, go to step 2. c Important: As well as during periodic maintenance, you should clean the curing unit and the pinning if you notice the print surface is blurred or unexpected patterns appear. A Open the top rear cover, the left rear cover, and the right rear cover on the press. 349