L-6534VW Operation Guide Overview of the Product Print Job Reception Settings 42 Item Explanation Auto Head Maintenance Set this when you want to perform head maintenance in addition to the head cleaning that the press performs automatically. Perform Before Starting Printing Sets whether or not auto head maintenance is performed before printing starts. Perform Periodically (when Printing) Press Change to select from the following three Head Maintenance items to perform periodically and set the operation cycle. ❏ Auto Head Maintenance The press checks for clogging in the nozzles, and performs automatic head cleaning if clogging is detected.
Select this when you want to check nozzles for clogging periodically while printing. ❏ Head Sides Cleaning This wipes off any ink deposits from the head sides. Performs Head Sides Cleaning in a shorter cycle than the head cleaning that the press performs automatically. When you print on a substrate that is easily charged such as film, ink mist might easily adhere to the head surface. Select this when the print surface gets dirty when ink drips during printing. ❏ Normal Cleaning This cleans the head surface to prevent the ink on the head surface from dripping onto the print surface during printing. Select this if the print surface still gets dirty even after you selected Head Sides Cleaning.
While Pausing or After Printing is Complete Sets whether or not auto head maintenance is performed when printing stops (except for emergency stops) or when printing is complete. Recovery operation when paused due to high drum temperature Select the recovery operation used if the press stops due to exceeding the maximum tempera‐ ture. Perform Head Cleaning Ahead of Schedule Before Printing When this is set to On, head cleaning is performed before printing if head cleaning is scheduled for during printing. This prevents print misalignments caused by head cleaning during printing.
However, depending on the time required to print the job, head cleaning may be performed again during printing, even if head cleaning has already been performed before printing. To check if head cleaning is scheduled to be performed during printing, select the job in the Job Management menu and check Head Cleaning During Printing in Print job settings. U “Waiting/Pause/Printed Screens” on page 58 Item Explanation Operation when Receiving After receiving a print job, select whether to print immediately, or pause printing. When Print is selected, it is received as a job waiting to be printed. When Pause is selected, it is received as a paused job.
Fixing Default Preset When registering a print job, select whether or not to set the default preset values. If you select Do not Fix until Printing, images are re-processed whenever the default preset is changed. As this may take a while to start printing, we recommend selecting Fix the Preset when Receiving.