L-6534VW Operation Guide Overview of the Product 52 Item Explanation Comment Enter text to explain the Print Info. Print Mode Select according to the type of substrate. You can select Print Mode only when you press Copy and Create. When you edit existing Print Info., you cannot change Print Mode. Paper #1 A basic mode to be selected when paper is used for the substrate. Supported substrate: Paper (semi-gloss), uncoated paper, paper (cast) Paper #1, High density The amount of dots and ink increases compared to Pa‐ per #1. Select in the following cases.
❏ You want to increase the quality of ink distribution on the filled-in areas ❏ You want to make black or other colors deeper ❏ You want to increase the color gamut You cannot select this when the print speed is set to 30 m/min or 50 m/min. Supported substrate: Paper (semi-gloss), uncoated paper, paper (cast) Film #1 A basic mode to be selected when a film is used for the substrate. This is also suitable for surface white printing. Supported substrate: Foil paper, white film, clear film, metallized film Film #1, High density The amount of dots and ink increases compared to Film #1. Select in the following cases.
❏ You want to increase the quality of ink distribution on the filled-in areas ❏ You want to make black or other colors deeper ❏ You want to increase the color gamut You cannot select this when the print speed is set to 30 m/min or 50 m/min. Supported substrate: Foil paper, white film, clear film, metallized film Film #2 Select this when blurred characters, bar codes, or lines are noticeable on the printout when Film #1 is used. Supported substrate: Foil paper, white film, clear film, metallized film Additional Printing Set when performing additional printing. Do Not Apply (default) Prints without detecting the eye marks on the base.
Apply Detects the base eye mark, and then prints so that the eye marks for the print data overlap.