L-6534VW Operation Guide Overview of the Product Substrate Settings Screen Set information on the substrate loaded in the press. Also, when changing the substrate, press Change Substrate on this screen. 61 Item Explanation Collate Set whether or not to collate output prints. When selected and when printing two or more copies, copies are printed off in single batches from the first page to the last page. When this is cleared, the number set for each page is printed. Collate can only be set for variable printing. Printing Range Change the range of print pages.
Perform Eye Mark Verification Printing When this is selected and you are using eye marks for additional printing or reverse feeding, 1 copy is printed when printing starts, and you can check and fine tune the printing position. Tab Item Explanation Loaded Substrate Change Substrate Change the substrate. See the following for details on replacing the substrate. U “Replacing the Substrate” on page 98 Change settings Displays the change screens for paper core thickness, align eye mark temp correction factor, and tension settings. Use the key pad to enter a number. U “Change settings Screen” on page 63 Adjust Eye Mark Sensor Detects eye marks and sets sensitivity for the eye mark sensor.
See the following for details on making adjustments. U “Setting Eye Marks and Eye Mark Sensor” on page 125 Adjust Print Position Fine tunes the print position for additional printing.