L-6534VW Operation Guide Overview of the Product Specifications of the Product Basic specifications 64 Explanation Reference Specifications of the main press unit, the additional UV lamp curing unit, and the corona treater. U “Basic specifications” on page 64 Specifications of the substrate used in this press. U “Substrate Specifications” on page 65 Specifications when there is a splice in the roll substrate. U “Substrate splicing specifications” on page 66 Specifications of the tape that can be set in the tape holder. U “Tape Specifications” on page 68 Specifications of the eye mark for reverse feeding and the eye mark for additional printing.
U “Eye mark specifications” on page 68 The print length for variable printing and banner printing. U “Variable Printing and Banner Printing Specifications” on page 69 Describes the margins or the feeding amount that vary depending on the print speed. U “Values Varying Depending on the Print Speed” on page 69 Appearance and dimensions of the press. U “External dimensions” on page 72 The substrate path channel in the press. U “Substrate Path Channel” on page 73 Main Press Unit, Additional UV Lamp Curing Unit, Corona Treater External dimensions Length: 4,250 mm Width: 2,290 mm Height: 2,520 mm U “External dimensions” on page 72 Mass Main unit:
2,632 kg (including the corona treater and the additional UV lamp curing unit.) Rated input Main unit: AC (three-phase three-wire + PE) 200 V Corona treater: AC (single-phase + PE) 200 to 240 V Additional UV lamp curing unit: AC (single-phase + PE) 200 to 240 V Rated voltage fluctuation range ±10% Rated frequency range Main unit: 50 Hz ±1% or 60 Hz ±1% Corona treater: 50 Hz ±1% or 60 Hz ±1% Additional UV lamp curing unit: 50 Hz ±1% or 60 Hz ±1% Rated current Main unit: 30 A Corona treater: 15 A Additional UV lamp curing unit: 40 A Rated power Main unit: 10.4 kVA Corona treater: 3.6 kVA Additional UV lamp curing unit: 9.6 kVA