L-6534VW Operation Guide Overview of the Product Substrate splicing specifications Specifications when there is a splice in the roll substrate. Splicing tape Splice section 66 Internal core diameter 3 inch (-40/1,000" +80/1,000") 76.2 mm (-1 mm +2 mm) Paper core thickness 3 to 20 mm We recommend 5 mm or more to prevent the paper core from being crushed Paper core material Paper Distance from paper core to roll edge Within ± 10 mm Status inside paper core No scratches, dents, paper peeling off, soiling, and nothing stuck to the paper core such as paper powder Spliced paper cores You cannot use spliced paper cores.
Amount of telescoping Within 20 mm Substrate feed width range variation ± 1 mm Flatness No creases or folds Splicing Tested tape thickness: 25 μm (both sides) Do not overlap the substrate at the splice. Tensile strength At least 1,750N/m Type Tape Width 20 mm or more Thickness 0.025 mm or more Color Red Splicing method No overlapping substrate