L-6534VW Operation Guide Overview of the Product Feeding amount at the end of work for continuing printing from the previous day * When the tension value for either one of unwinding or rewinding is 10 N or less Feeding amount at the beginning of work for continuing printing from the previous day (normal printing) * When the tension value for either one of unwinding or rewinding is 10 N or less Feeding amount at the beginning of work for continuing printing from the previous day (additional printing) * When the tension value for either one of unwinding or rewinding is 10 N or less Margins Between Pages When Resuming Printing When you set Reverse Feeding to Do Not Apply in Preset for Reverse Feeding, the margin to be entered between pages when resuming printing varies depending on the print speed.
It also varies when the set value of the tension applied to the substrate is small.
* When the tension value for either one of unwinding or rewinding is 10 N or less 71 Preset item Print Speed With normal tension With low tension* Feeding Amount 50 m/min (Productivity) -38 m -50 m 30 m/min (Standard) -33 m -37 m 15 m/min (High density) -31 m -32 m 7.6 m/min (Reverse White) -30 m -31 m Preset item Print Speed With normal tension With low tension* Feeding Amount 50 m/min (Productivity) 38 m 50 m 30 m/min (Standard) 33 m 37 m 15 m/min (High density) 31 m 32 m 7.6 m/min (Reverse White) 30 m 31 m Preset item Print Speed With normal tension With low tension* Feeding Amount 50 m/min (Productivity) 34 m 46 m 30 m/min (Standard) 29 m 33 m 15 m/min (High density) 27 m 28 m 7.6 m/min (Reverse White) 26 m 27 m Print Speed With normal tension With low tension* 50 m/min (Productivity) 19 m 25 m 30 m/min (Standard) 16 m 18 m 15 m/min (High density) 7 m 16 m 7.6 m/min (Reverse White) 7 m 7 m