L-6534VW Operation Guide Basic Operations Creating Print Data Prepare the data you need for the label design. The printable area is the gray area in the following figure. If you use eye marks to align the substrate when reverse feeding, place the eye mark for reverse feeding on the print data. Create the eye mark as illustrated below. 87 Item Explanation a (print length) 30 to 1,000 mm (1.181 to 39.370 inch) b (print width) 70.0 to 330.4 mm (2.755 to 13.007 inch) Including eye marks. You may need to print an eye mark of 5 mm and a gap of 1 mm. c (upper margin) 5 mm d (bottom margin) 5 mm