L-6534VW Operation Guide Basic Operations For replacing the substrate, setting Preset for Printing and Preset for Reverse Feeding is required. If there is no suitable preset available, create a new preset before replacing. U “Creating Preset for Printing/Print Info.” on page 89 U “Creating Preset for Reverse Feeding” on page 94 Replacing the Unwinder Side Substrate Below is the procedure to replace the substrate on the unwinder side. 99 Operation place Contents Touch panel From the menu on the left, press Substrate Settings and then Change Substrate. Press Press the Feed Ready switch on the press to release the tension in the substrate.
Press Pull out the electrode cartridge from the corona treater. Press Cut the substrate on the unwinder side workbench. Press Remove the substrate from the unwinder axis. Press Load the new substrate on the unwinder axis. Press Splice the new substrate to the previously loaded substrate.